What do Our Heat Pump, Air Conditioning, and Furnace Tune-Ups Include?

benefits-of-tune-up

Benefits of a Tune-Up

  • Extend Equipment Life Safeguard your investment with regular maintenance
  • Reduce Monthly Energy Costs Properly maintained equipment operates more efficiently
  • Maximize Performance Tune-ups can reveal potential problems
tune-up-special

If you are not 100% satisfied with our service, we will give you a FULL refund!

logo-bar

21 Point Gas Furnace Tune-Up

  • Cycle Furnace
  • Limited Blower cleaning
  • Clean or change filter
  • Test safety controls
  • Test temperature differential
  • Clean flame sensor
  • Oil the blower & inducer motor
  • Test amp draw to blower
  • Rate/set furnace input
  • Test amp draw inducer
  • Inspect flue pipe
  • Test hot surface igniter
  • Clean burners
  • Tighten electrical connections
  • Clean & adjust pilot assembly
  • Clean exterior
  • Test gas pressure
  • Brush & inspect heat exchanger
  • Test for gas leaks
  • Vacuum burner compartment
  • Cycle condensate pump ( 90% or better EF)

18 Point Ductless Heat Pump Tune-up

OUTDOOR

  • Inspect Electrical¬†for Damage or Animal Infiltration
  • Inspect Fan Blade for Damage
  • Inspect Flare Connections
  • Inspect for EEV Motor Shaft Corrosion
  • Remove Debris from Inverter Board
  • Clean Condenser Coil
  • Clean Unit Casing
  • Clean Base Pan

INDOOR

  • Clean Filters
  • Clean Evaporator Coil with Mild Cleaner
  • Inspect Electrical for any Damage
  • Inspect Blower Wheel
  • Check Temperature Split
  • Replace Batteries in Remote Control
  • Ensure Drainage from Indoor Head
  • Inspect Electrical Connections
  • Inspect Condensate Pump
  • Inspect Flare Connections

18 Point Heat Pump or A/C Tune-Up

  • Cycle the A/C
  • Limited clean & adjust blower motor
  • Inspect blower wheel
  • Test safety and limits
  • Tighten electrical connections
  • Lubricate moving parts
  • Clean equipment cabinet
  • Check indoor coils for proper drainage
  • Check thermostat operation
  • Inspect condenser coil and clean
  • Clean drain pan and cabinet
  • Monitor refrigerant pressures
  • Check start/run amp draw
  • Check defrost initiate/terminate
  • Inspect contactor and relays
  • Test amp draw on fan motors
  • Change fuses
  • Test indoor/outdoor ambient temps
0